BLACK FRIDAY SALEGET EARLY DEALS BEFORE THE RUSH
Worksport Logo

BLACK FRIDAY SALE

WHY WAIT FOR BLACK FRIDAY? GET YOUR BED COVERED WITH EARLY DEALS TODAY!

BUY NOW, PAY LATER.0% INTEREST, $0 DOWN.

Financing with PayTomorrow

Loading...

New and Improved HD3 Low Profile Hard Cover

A strong, lightweight cover with a sleek design that supports up to 400 lbs. of evenly distributed load capacity - built for heavy hauling and serious protection.

Lightning-Fast Cargo Access

Cable-operated quick latches that make accessing your truck bed effortless, whether you are in a rush to access your bed or simply loading up for the day.

Ample Cargo Space for Heavy-Hauling

Trifold, low-profile design of the bed cover provides access to a wide portion of bed making it perfect for hauling heavy loads without needing to remove the cover.

Superior Dual-Lock Sealing System

Advanced EPDM perimeter and rail seals lock out the elements, keeping your cargo secure and dry – no bulky drainage rails or tubes needed.

Upgraded Full-Length Rails

Built on the rugged AL3 platform, the new full-length rails keep your cover tightly secured to the truck bed and make installation hassle-free – no drilling or permanent modifications needed.

Improved Security with Added Latching Points

With the addition of a new middle quick latch, HD3 now features six total latching points paired with alignment clips that make the cover harder to pry open, protecting what's underneath.

Same platform as our premium hard covers

Tougher bed protection, same low profile

HD3 adds a middle quick latch, full-length rails and dual-lock seals to the same unique hard cover platform as all our premium hard covers.

  • 6×Latching points, cable-operated
  • 2×Alignment clips
  • 400 lbEven load capacity
  • 45 minInstall, at its quickest. No drilling
HD3 cover showing its latching points and alignment clips

Enhanced security, quick access

Cable-operated quick latches, paired with alignment clips, make the HD3 harder to pry open. Your cargo stays secure, and you still get in fast when you need to.

Close-up of the HD3 EPDM Dual-Lock sealing system

Dual-Lock sealing system

A complete perimeter seal plus full-length rail seals on each side keep the weather out. No bulky drainage rails or tubes to deal with leaks after they happen.

HD3 cover with full-length rails installed on a truck bed

Full-length rails, easy install

Full-length rails keep the cover tight to the truck bed for a precise fit. No drilling or permanent changes, so the install is quick and clean.

Toolboxes resting on the reinforced low-profile HD3 panelsUp to 3x thicker

Tougher panels, same low profile

Premium-coated aluminum panels, up to 3× thicker, for better dent and scratch resistance while keeping a sleek, low look.

Get a closer look.
HD3 Banner4
HD3 Banner5
HD3 Banner1
HD3 Banner2
HD3 Banner3
HD3 Banner4
HD3 Banner5
HD3 Banner1
HD3 Banner2
Competitor vs Worksport

Thicker and stronger, without any fillers

Each panel is one formed sheet of aluminum with a crossbar. The edge-to-edge seal keeps water out of the panel, and the seamless form leaves no gaps.

Typical competitor panel0.016" aluminum top sheetWorksport panel3× thicker aluminum*
Side-by-side cross section comparing a typical competitor composite panel with the Worksport formed aluminum panel

Typical competitor

Worksport

Up close: the Worksport edge

Worksport panel edge folded from the same aluminum sheet as the top
One sheet, folded at the edgeThe edge is formed from the same sheet as the top. No layers, no seams, no filler.
Worksport folded aluminum profile running along the panel edge
Formed along its lengthThe same folded profile runs along the panel edge in one piece.

Top panel thickness, same scale

Typical competitor0.016"
Worksport3× thicker*

*More than 3× thicker than the typical competitor's panel and up to 4× thicker than what has been used or could be used. Thickness comparisons are based on common materials used in similar applications and may vary by manufacturer.

Background Image
BUY NOW,
PAY LATER.
0% INTEREST, $0 DOWN.
Now Available withPayTomorrow

Financing with PayTomorrow

Installation guides

Pick your truck and we'll pull up the install guide made for it.

Pick your year to get started.

Your guide shows up here

Each HD3 install guide is made for one truck and bed length.

FC3 Pro Toyota Tacoma closed tonneau cover

Size does matter

Double-check you have the right size before ordering. Measure your bed interior in inches, from the cab to the tailgate.

  1. Drop the tailgate and hold the tape against the inside edge of the bulkhead.
  2. Measure along the bed floor to the inside edge of the closed tailgate.
  3. Match the measurement to the closest bed length in the selector. Year, make, model, and trim must match too.

Return shipping generally isn't covered if the wrong product was selected or incorrect measurements were used. If something's off, contact us right away and we'll review it case by case.

How to measure your bed size

Install and warranty

No cutting, trimming or drilling, and every order ships with the hardware. Install can be as quick as 45 minutes.

How to review a delivered package

Every truck this cover fits has its own install guide. Pick yours under Installation guides above, or see the full list.

HD3 Installation Guides

Need more help?

Trained teams in Canada and the US. Mon–Fri 9am–8pm ET, Sat–Sun 10am–3pm ET. Can't get through? Email, chat or leave a voicemail and we'll get back to you.

Call us

888-554-8789

Call

Instant answers

Fitment, orders, shipping